您好!歡迎來到唐山盛通鍛造有限公司官方網站!

全國免費咨詢熱線 hotline

0315-3172368

鍛件廠家
您當前的位置 : 首 頁 > 產品中心 > 原材料

自由鍛件公司

2019-10-31
自由鍛件公司
詳細介紹:

材料對自由鍛件鍛壓設備的適應性


自由鍛件鋁合金:鍛造變形量很大時,優先選用水壓機,否則可任選。


鈹合金:優先選用水壓機,因慢速下的可鍛性良好。


銅合金:優先選用錘、螺旋壓力機或曲柄壓力機,但對變形速率敏感的青銅和高鋅黃銅,應優先選用水壓機。


鈮合金:錘、螺旋壓力機和曲柄壓力機,當合金請求高溫鍛造時,優先選用水壓機。


鎂合金:因其快速變形的可鍛性差,應優先選用水壓機。


鉬合金:當請求高溫鍛造時,優先選用錘、螺旋壓力機或曲柄壓力機。


鎳基合金:根據鍛件的截面厚度選定;鍛造薄的截面(小于12. 7毫米)鍛件時,優先選用錘、螺旋壓力機、曲柄壓力機,否則可任選。


碳鋼和低合金鋼:鍛造含有薄的截面的鍛件或氧化皮肅清較難題時,優先選用錘、 螺旋壓力機或曲柄壓力機,否則可任選。


不銹鋼:含有薄截面的鍛件,優先選用錘、螺旋壓力機或曲柄壓力機,否則可任選。


鉭合金:高溫鍛造時,優先選用錘、螺旋壓力機或曲柄壓力機。


鈦合金:含有薄截面的鍛件,優先選用錘、螺旋壓力機或曲柄壓力機,否則可任選。


鎢合金:高溫鍛造時,優先選用錘、螺旋壓力機或曲柄壓力機。


鋯合金:當毛坯有包套時,優先選用水壓機(高于760℃);鍛造溫度低于 760℃的,可任選。


自由鍛件公司哪家好,就找唐山盛通鍛造有限公司。


Adaptability of materials to free forging press equipment


Free forging aluminum alloy: When the forging deformation is large, the hydraulic press is preferred, otherwise it can be optional.


Niobium alloy: The hydraulic press is preferred because of the good forgeability at slow speed.


Copper alloy: Hammer, screw press or crank press are preferred, but bronze and high-zinc brass, which are sensitive to deformation rate, should be preferred.


Niobium alloys: hammers, screw presses and crank presses. When alloys are required for high temperature forging, hydraulic presses are preferred.


Magnesium alloy: Due to its poorly deformable forgeability, a hydraulic press should be preferred.


Molybdenum alloy: When high temperature forging is requested, hammer, screw press or crank press are preferred.


Nickel-based alloy: selected according to the section thickness of the forging; forging a thin section (less than 12.7 mm) forging, it is preferred to use a hammer, a screw press, or a crank press, otherwise it may be optional.


Carbon steel and low-alloy steel: When forging a forging or a scale with a thin section, it is preferable to use a hammer, a screw press or a crank press, otherwise it may be optional.


Stainless steel: Forgings with a thin section, preferably a hammer, screw press or crank press, otherwise optional.


Niobium alloy: For high temperature forging, hammer, screw press or crank press are preferred.


Titanium alloy: Forgings with a thin section, preferably a hammer, screw press or crank press, otherwise optional.


Tungsten alloy: For high temperature forging, hammer, screw press or crank press are preferred.


Zirconium alloy: When the blank has a wrap, the hydraulic press (above 760 ° C) is preferred; the forging temperature is lower than 760 ° C, optional.

自由鍛件公司

標簽

上一篇:原材料2019-10-31
下一篇:沒有了

Z近瀏覽:

聯系方式:

電話:0315-3172368    傳真:0315-3172368

郵箱:shegntong3172368@126.com

地址:唐山市開平區鄭莊子鎮安各莊村南

制服丝袜电影_中国产xxxxa片免费视频_久久久久高潮综合影院_另类尿喷潮videofree